SCP CONTROLLER
The SCP is the heart of the field hardware, and performs all intelligent decisions for the sub-controllers connected to it.  The SCP has 4 Communications Channels per port and can communicate to 32 Sub-Controllers.
 
     
 

SCP CONTROLLER
Introduction
The Integrated System 2000 family of hardware was designed to meet the growing requirement for “Open Architecture” electronics in the access control and security marketplace. The SCP is the heart of the field hardware, and provides the flexibility to meet a wide range of system architecture applications. This family of products has been in the field for 10 years, and over 27,000 units have been placed in service.

 Hardware
· 32-bit Processor
· 32-bit Microsoft Windows DLL
· 1 Mb to 4 Mb Ram
· Flash Memory for Firmware
· 2 Inputs (Enclosure Tamper & Power)
  Technology
The SCP uses a 32-bit processor,32-bit Windows DLL(s) and FLASH memory forfirmware. Firmware features coupled with the latest processor technology make this field processor a leader in the industry. Many Dealers/Integrators praise the product for its reliability, ease of installation and competitive price.		 Communications
· 19.2 to 38.4 Kbps (RS-232 & RS-485),
Multi-Drop, 4000 Feet Maximum
· Ethernet-TCP/IP
· Fiber Optics
· Four Channels to Sub-Processors
· Dedicated, or Dial Telephone Network
  Enclosures
The IS2000 field processors are offered either with an enclosure, or without an enclosure. Refer to the IS2-ENC-1 cut-sheet for details. Many Dealer/Integrators prefer to integrate their systems with specific electronics in their field enclosures.		 Capacity
· 20,000 to 250,000 Cardholders in RAM
· 64 Card Readers per Processor, or 32
Sub-Controllers (MR-50, MR-52, SI-16
and SO-16)
 

Warranty
The Imron Corporation factory warranty period for the IS2000 System is 18 months from the shipment date.

 Access Control
· Magstripe
· Proximity
· Smart Card
· Wiegand
· Bar Code
· Biometrics
 

ELECTRICAL SPECIFICATIONS

· Voltage: 12 +/- 15% (10.2 to 13.8) VDC
· Current: 125 mA maximum
· Monitor inputs: Two supervised, end-of-line resistors,1k ohm 1% 3 watt standard
· RS-485 Cable: 4,000 ft (1,219 m) max. 24 AWG 120 ohm impedance
· LED output: TTL compatible, high >3V, low <0.5V, 5 mA source/sink maximum
· Buzzer output: Open collector, 4 VDC open circuit max. 10 mA sink max.
· Reader data inputs: TTL compatible inputs
 

GENERAL SPECIFICATIONS

· Physical:
Dimensions: 6 in. W x 8 in. L x 1 in. H (152 mm W x 203 mm L x 25 mm H)
Weight: 16 oz. (454gm) nominal
· Environment:
Temperature:
-55 o C to +85o C, storage
-40 o C to +75 o C, operating
Humidity: 10% to 95% RHNC

Copyright © Imron Corporation all rights reserved.