Imron Corporation

EPC/SCP ACCESS CONTROL HARDWARE
The IS2000 family of hardware was designed to meet the growing requirement for “Open Architecture” electronics in the access control and security marketplace. This family of products has been in the field for over 15 years, and thousands of units have been placed in service.
The hardware uses a 32-bit processor, 32-bit Windows DLL(s) and FLASH memory for firmware. Firmware features coupled with the latest processor technology make this field processor a leader in the industry. Many Dealers/Integrators praise the product for its reliability, ease of installation and competitive price.

For more technical information, contact Jesus Munguia.

SCP HARDWARE


	EPC-1 The EPC-1 Hardware is an IP based POE (Power Over Ethernet) door controller that is scalable for any size installation. Each door controller maintains a complete copy of the database, providing intelligence at every door. The EPC-1 supports the same features as its predecessors in the SCP family and is economically priced for a cost effective, easy to install, and scalable solution.
	SCP-2 The SCP-2 is an intelligent controller that has a primary 10/100 Ethernet port and (2) reader ports. The controller also has eight (8) supervised inputs, four (4) relays and can communicate with up to 32 Sub-Controllers. Datasheet
	MR-50 Single door sub-controller with 1 reader port, 2 supervised inputs and 2 relays. The MR-50 was designed to minimize wiring and labor associated with installing field hardware. Datasheet
	MR-52 Dual door sub-controller with 2 reader ports, 8 supervised inputs and 6 relays. The MR-52 is a two-card reader processor that provides the flexibility to meet a wide range of system architecture applications. Datasheet
	SI-16 The SI-16 is an alarm zone input sub-controller, that can monitor up to 16 supervised inputs, and control 2 onboard relays. Datasheet
	SO-16 The SO-16 is a relay output sub-controller, that can control up to 16 onboard relays. Datasheet
	MR-DT Keypad Display Terminal Interface with built-in MR-50T sub-controller, 16 position keypad with a reader port. This sub-controller can communicate to the SCP via 2-wire RS-485 or the reader port of an MR-50/52.